Screw Oil Press

The Pellet Cooler is suitable for the cooling of any pelleted product between 3 and 16 mm (maximum length of pellet 30mm.). The Cooler consists of a fixed upper grid to distribute the product into the cabin, a middle grid, which helps to air circulation, and an adjustable lower grid, which determines how much product, is discharged with each stroke of the discharge hopper.

1.Can these small oil press process many raw material?
Yes,it could process lots of oil seeds, such as peanut, soyabean, rapeseed, sunflower seed, etc.

2.What’s the urease activity after solvent extraction?
0.2~0.4

3.Is it necessary to use a boiler in the oil press plant?
 For hot press, yes, but for cold press, no

4.What’s your biggest capacity when we choose the small oil press machine?
20TPD

5.When we need the prepress expeller?
If the oil content is high, and you want to use solvent extraction later, prepress is necessary.

6.What’s the difference of chemical and physical refining?
 The main difference is deacidifying

The neutralized oil at 90-110°C is sprayed into the bleach earth oil mixer. Here it is dried and mixed with bleaching earth. The bleaching earth is automatically dosed by the hermetic Earth Proportioning System directly from the Bleach Earth Feed Hopper into the Bleacher via a pipe located below the oil spray to prevent dust from entering the vacuum system. The Earth Dosing System is based on two automated butterfly valves with an intermediate dosing chamber. The valves are sequenced by an adjustable timer system in the control panel. 
Then the slurry comes into the Bleacher, which is equipped with three steam agitated compartments to ensure proper mixing and retention time so that the colour bodies and oxidizing materials, etc. in the oil are gradually absorbed by the earth.
The oil/earth mixture is pumped through one of the Bleaching Filters followed by one of the alternating Polishing Filters where the earth and solid impurities are retained. 
  The Bleaching Filters operate alternately so that one unit is always working while the other one is cleaned.  The Bleaching Filter cleaning cycle consists of pressurizing the bleaching filter with steam until the main liquid volume has been discharged and then continuing the blowing of steam via the separator so that the cake is properly deoiled. The residual oil (heel) is then discharged to the Bleacher before opening the Bleaching Filter and vibrating off the dry cake onto a conveyor belt or cart.
The Bleaching Filter is then closed and evacuated. The clean Bleaching Filter is filled and pressurized with bleached oil and pre-coated.  It is maintained under circulation until the flow has been switched from the other Bleaching Filter.

I got you email from your website while looking for a COLD PRESS
machine that could extract oil from pumpkin seed please do send me
more information on the machine that could do the cold press,
waiting for your reply

I am looking for extracting machine for olive to poduct around 2 tone per houre
and the price for new and used aslo for shipping to JORDAN,THANK YOU
Regart

ghassan

Hi,

We are interested in building a palm oil mill, preferably scalable / movable as our production increases. We are looking for a small mill to start with, what is the smallest mill viable?

We are looking to put the mill up in Latin America and would work with you in the design and build of the mill.

Kindly revert with a proposal.

Thank you and best regards.

we are wanting to start a briquetting plant in southern brasil. we have a sawmill and sugar cane fields nearby, we want to use the sawdust, wood chips and bagasse from the sugar cane, so we might also be interested in biomass briquettes, down the road. for now, we have a buyer for 2000 tons of pillow shaped charcoal briquettes a month. our line is going to be a normal 8 hours a day, 5 day a week setup. i just need to know the price of the equipment you think we would need and also of the cost of shipping to santos, brasil.

Dear seller, I would like to enquire about YZS-165 Screw Oil Press, is it possible to order for privat person, what would be the price, and how much is the shipping to Lithuania?

 Sincerely Arunas Petronis, Looking forvard for your answer.