Screw Oil Press

I am looking for extracting machine for olive to poduct around 2 tone per houre
and the price for new and used aslo for shipping to JORDAN,THANK YOU
Regart

ghassan

Hi,

We are interested in building a palm oil mill, preferably scalable / movable as our production increases. We are looking for a small mill to start with, what is the smallest mill viable?

We are looking to put the mill up in Latin America and would work with you in the design and build of the mill.

Kindly revert with a proposal.

Thank you and best regards.

we are wanting to start a briquetting plant in southern brasil. we have a sawmill and sugar cane fields nearby, we want to use the sawdust, wood chips and bagasse from the sugar cane, so we might also be interested in biomass briquettes, down the road. for now, we have a buyer for 2000 tons of pillow shaped charcoal briquettes a month. our line is going to be a normal 8 hours a day, 5 day a week setup. i just need to know the price of the equipment you think we would need and also of the cost of shipping to santos, brasil.

Dear seller, I would like to enquire about YZS-165 Screw Oil Press, is it possible to order for privat person, what would be the price, and how much is the shipping to Lithuania?

 Sincerely Arunas Petronis, Looking forvard for your answer.

Olive oil extraction is the process of extracting the oil present in the olive drupes for food use. The oil is produced in the mesocarp cells, and stored in a particular type of vacuole called a lipovacuole, i.e. every cell contains a tiny olive oil droplet. Olive oil extraction is the process of separating the oil from the other fruit contents (vegetative extract liquid and solid material). It is possible to attain this separation by physical means alone, i.e. oil and water don’t mix, so they are relatively easy to separate. This contrasts with other oils that are extracted with chemical solvents (generally hexane). The first operation when extracting olive oil is washing the olives, to reduce the presence of contaminants, especially soil which can create a particular flavour defect called “soil taste”.

After sign the contract with each other, our General Manager is sending the famous oracle bone inscriptions to our Canada Clients as gift.

Glad to inform our company will attend the #107 Canton Fair from April 15-19, 2010. You’re welcome to visit our booth.
The information of our booth as follows:

Exhibition: #107 Canton Fair
Booth No.: 2.1K17 & 2.1K18
Date: Phase 1: April 15-19, 2010 9:30-18:00
Contact person: Ms. Grace Ma
Mobile: 0086 13223992088 or 0086 13703462277
Venue: China Import and Export Fair Complex
(No. 380, Yuejiang Zhong Road, Guangzhou, China)

We will exhibit oil mill plant, flour mill plant, pellet mill plant for wood&feed, briquetting press and other products at this fair.Hope to meet you at this Fair.

Best regards,

Anyang General International Co.,Ltd

The oil press often used to press soy bean, cottonseed, peanut kernels, sesame, and rape seed is ideal for the small rural oil mill. Sometimes, it may go wrong for various kinds of reasons, such as, produce less or even no oil. At this time, prompt processing must be used to put it right.
1. Less oil produced
①If the pressing bar is tightly assembled or the gap between which is blocked by oil residue and dregs, cleaning must be done timely, or readjust the tightness of the pressing bars. If the oil returns to hopper, material should be stopped to put in, instead add cakes into chamber to drive oil off and continue to work. Or you can discharge the oil from the discharge gate and readjust the components on the chamber, and then turn on the machine to press. ②If the raw material is high in oil, but the cake is too thin to let the oil go through the gap and store in the chamber or hopper. Then operate the machine according to the raw material seeds high in oil. Cakes should be thick; on the other hand it must be thin.
2. Cracked residue appears at the outlet severely
① If the raw material is too dry and residue discharged from the gaps increased, at this time, you need readjust the water content in the raw material.②If the raw material is too wet, the pressure can’t be formed and the oil residue can’t be separated, and if the gap for discharging oil is too wide at this time, the residue will be squeezed out. Then the water content of the oil material and the tightness of the pressing bar should be readjusted.

3. Low oil output
①If the raw material is too wet or too dry, affected with damp and go moldy, the kernels are hollow or the impurities are too much the raw material or the water content in the raw material should be readjusted. ②If the gap for oil discharging is blocked, it must be cleaned and readjust the tightness of the pressing bar according to the oil content. ③If the components had been worn down, they must be replaced by the new ones. ④If the cake is too thin or too thick, the thickness should be readjusted or change the output condition. ⑤ At the beginning of the pressing, if the temperature is too low, it must be elevated.
4. Screw shaft blocked
①If feed too much material at the beginning, you can add the pan-fried oil material seeds to the machine and grinder repeatedly to remove some. ②In the process of the pressing, if the chamber is out of material, it is because feed too much material in the hopper. So the material should be added continuously and well-distributed. And once it blocked, cut the electric power source at once and stop to feed and open the feed plate, and then withdraw the screw shaft, clean the chamber and continue to repress.
Other reasons that affect the productivity
①The cleanliness of the raw material is not clean enough, perhaps sands or impurities enter in to the chamber. ②Screw shaft or the cake outlet is not smooth that it affects feeding and cake outputting. It can be polished with the grinding wheels, or blend some corns with big friction coefficient into the cakes and add right amount water. Then turn on the machine and feed the material gradually to polish the grinding wheel.③If the speed of the screw shaft is too fast or too slow, adjust it until it conform to the rules.④If the screw shaft had been polished, the components should be exchanged.